Suitable for use on most types of leather. Ideal for use on pigmented, synthetic materials, semi-anilines and when repairing or restoring waxed and aniline leathers. Not suitable for use on most nubucks and all suedes.

50ml: Small touch-ups, 1 x armrest, 1 x seat cushion top

125ml: 1 car seat or 2-3 x standard sofa seats

250ml: 1 x 2 seater or 3 x standard seat cushions plus 2 armrests

500ml: 1 x 3 seater sofa,

1L: 1 x 5-8 seater lounge suite plus ottoman or chaise, 1 x large modular sofa

2L: 2 x large multi piece lounge suites or multiple jobs

3L: Multiple large jobs

Note: Coverage estimates are approximate. Coverage is affected by a number of variables such as the type and condition of your leather, and the method of application. Your job may require more or less product.

Pack sizes

50ml

125ml

250ml

500ml

1L

2L

3L

Variants

Matte

Satin

Gloss

High Gloss

1) Apply using a sponge or spray gun to thoroughly clean or freshly dried painted or dyed leather.

2) To apply by sponge, pour some Topcoat (No.7) onto a sponge, squeeze to incorporate, then wipe using light pressure over one area at a time. Allow to dry (30 mins to 1 hours). A hair dryer can be used to speed drying times.

3) Apply a second coat to ensure full and even coverage. A third coat can be applied to high traffic areas if desired

4) Wait 7-14 days before applying leather conditioner; Nourish (No.2) for pigmented leathers, Nubuck, Suede & Aniline Nourish (No.11) for unfinished leathers.

Ideal for: Sealing, protecting and finishing leather. Offers increased rub-resistence to colour coatings and seals dyes to prevent dye transfer.

Can also be used on aniline, semi-aniline and waxed leathers when colouring with leather paint or dyes.

Finish: Available in Matte, Satin, Gloss and High Gloss

Use with: Leather Paint, Aniline Dye Stains, Colour Restoration Creams plus the full refinishing system in our Repair & Recolour Kits.

Application schedule: Reapply as needed to new, freshly painted or dyed leather.

Application method: Pour onto a sponge then wipe evenly over the surface. Can also be applied by fine paint brush for detailed work or by spray gun.

Best accessories: A sponge.

Instructions: On the labels, Directions for Use tab and under the How To tab in the main menu

Drying time: 1 coat = 30 minutes - 1 hour. Can be force dried with a hair dryer, a room heater or gentle sunshine. When applied over several coats of freshly applied colour, all extra drying time.

Time before use: wait 48 hours

Available in kits: Yes

Tips:

Protect your work area and wear gloves

Work quickly

Avoid disturbing the coating whilst drying

Can be mixed with leather paint and aniline dyes

Troubleshooting:

If the application of Topcoat disturbs the colour coatings, the colour coatings need more drying time.

If you have purchased a topcoat that is shinier than you require, Dulling Agent can be used to reduce the level of shine

If you have purchased Matte topcoat, be sure to use Dulling Agent in your Leather Paint to align the level of shine of both coatings

Matte Topcoat is best applied by spray gun. If hand application appears streaky, apply one full coat and allow drying. For the second coat (and third if needed) try mixing 10-20% leather paint into the Topcoat.

Test before use: Always test products in an inconspicuous area first. There are many makers of leather and leather coatings and whilst most are to standard, there may be some that are not.

Storage: Lid on tight and away from direct UV light and heat (in a cool dark cupboard). Avoid contaminating the contents with baterial sources including skin.